(FNIRSI 2C53P) 3 in 1 Oscilloscope/Multimeter/DDS Signal Generator, Handheld Tablet Touchscreen Digital Automotive Oscilloscope Portable 2 Channel 50MHz, 250Ms/S, 19999 Counts

SPECIFICATIONModel: 2C53PDisplay: 4.3 inch, 480*272 pixels, adjustable backlight brightnessPower supply: built-in 4000mAh lithium batteryLanguage: EN, ES, PT, DE, ZH, RU, JP, KRDimensions: 5.71 x 3.86 x 1.38 inchesNet weight: 0.79 lb.OscilloscopeChannel: Dual channelAnalog bandwidth: 50MHzReal-time sample rate: 250MSa/sStorage depth: Up to 64kByteInput impedance: 1MΩTime base range: 10ns/div - 10s/divVertical sensitivity: 10mv/div - 10v/divVertical resolution: 8 bitsMaximum measured voltage: ±400VProbe: 1x/10xStorage space: 13MBandwidth limit: Support 20MHz limitSignal GeneratorChannel: single channelFrequency: 0-10MHz（Sine wave: 10MHz, other waveforms 5MHz）Amplitude: 0.1V-3.0VSquare wave duty cycle: 0-100%Signal type: sinusoidal wave, square wave, sawtooth wave, half wave, full wave, positive step wave, negative step wave, DC signal, exponential rise, exponential fall, multi-audio, and sync pulseMultimeterDC Voltage: 1.9999V/19.999V/199.99V/1000.0VAC voltage: 1.9999V/19.999V/199.99V/750.0VDC current: 19.999mA/199.99mA/1.9999A/9.999AAC current: 19.999mA/199.99mA/1.9999A/9.999AResistance: 19.999MΩ/1.9999MΩ/199.99KΩ/19.999KΩ/1.9999KΩ/199.99ΩCapacitance: 999.9uF/99.99uF/9.999uF/999.9nF/99.99nF/9.999nF/9.999mF/99.99mFTemperature: -55~1300℃ (-67~2372℉)Diode: YesContinuity test: YesPACKAGE1 x 3 in 1 Oscilloscope, Multimeter, DDS Signal Generator2 x P6100 Probe1 x Multimeter Probe1 x Alligator Clips1 x Data Cable1 x Storage Case1 x Manual

• Oscilloscope: 2 channels, 50MHz bandwidth, 250MS/s sampling rate, built-in high-voltage protection module, maximum voltage ±400V, waveform screenshot support
• Digital Multimeter: 4.5-digit 19999 counts, measures AC/DC voltage, current, capacitance, resistance, diode, continuity, and temperature, etc
• DDS Signal Generator: outputs 12 types of function signals such as sine, square, triangle, full, half, noise, and DC, up to 10MHz, adjustable frequency, amplitude, and duty cycle
• High-Performance: FPGA+MCU+ADC design of oscilloscope multimeter tester ensures robust capture functionality and overheating protection; smart analysis capabilities including afterglow, FFT spectrum analysis, cursor measurement, and X-Y mode
• Touchscreen & Portable: Oscilloscope signal generator multimeter features an intuitive 4.3-in IPS Touchscreen, ultra-high resolution 480x272; 4000mAh lithium battery provides up to 4-H usage on a full charge, plus a portable carry case, ideal for outdoor and on-the-go use