1PC SS316L Male Bulkhead Union 1/8 1/4 3/8 1/2 inch LOK to MNPT Tube Fitting Connector 3000psi Stainless Steel Replace(0.5 inch)

1PC SS316L Male Bulkhead Union 1/8 1/4 3/8 1/2 inch LOK to MNPT Tube Fitting Connector 3000psi Stainless Steel replaceFeatures- Provide a reliable, leak proof seal under severe conditions such as temperature cycling, vibration and pulsation.- Contribute to productivity improvement because of machined surfaces on the inner finishing.- Assembled easily without the requirement of any special tools.- Excellent finish level to allow smooth flow transition.Material: 316 Stainless SteelStraight fittings are machined from bar stock and shaped fittings from forgings.Installation Instruction1. Firmly insert the tubing until it bottoms in the fitting body.2. Finger tighten the nut.3. Mark the nut at the 6 o'clock position, with pencil or scribe.4. Hold the body with a backup wrench, or vice, then tighten nut.5. 1-1/4 turns to the 9 o'clock position.6. The above applies to all fittings from 1/4"to 1"(6mm to 25mm).7. Fittings from 1/16"to 3/16"(3mm to 4mm), only 3/4 turn is required.Package Including: 1 piece tube fitting.ApplicationFor inert gas, reactive, flammable, oxidizing and gas mixtures, Purity max. 6.0.Tube Fittings are appropriate for Gas Systems, but the implementation of certain standards mentioned below should be adhered to just as in other systems.1. Tubing hardness must be less than that of the ferrules.2. Tubing should be far away of finishing imperfections, defects and round in shape.3. Tubing ends must be cut squarely and perpendicular to the center-line of the tubing. After the tubing is cut it must be deburred on both the inside and outside with a fully sharpened deburring tool.

• 1PC of LOK to MNPT Tube Fitting Connector
• Material: 316 Stainless Steel
• Straight fittings are machined from bar stock and shaped fittings from forgings.